Yamaha DXR10 Owner's Manual - Page 9

Browse online or download pdf Owner's Manual for Speaker System Yamaha DXR10. Yamaha DXR10 22 pages. Dxr and dxs series powered speakers and subwoofers
Also for Yamaha DXR10: Manual (12 pages), Owner's Manual (22 pages), Owner's Manual (22 pages), (Spanish) Manual De Instrucciones (22 pages), (Italian) Manuale Di Istruzioni (22 pages), (Russian) (22 pages)

Print Page

AC IN socket

Connect the supplied AC power cord here. First, connect the

power cord to the device, then insert the power cord plug

into the AC outlet.

Be sure to turn the power off before connecting

or disconnecting the power cord.

CAUTION

Tiltable pole socket (DXR series)

This mount has two pole sockets. You can choose the angle

of the DXR (mounted on a speaker pole) so that the speaker

will be horizontal to the floor or tilting toward the floor by 7

degrees.

7˚

DXR15, DXR12, DXR10, DXR8, DXS15, DXS12

Turns the power supply on or off.

Press the switch to the On position to turn the power on ( ).

NOTE

If you are using multiple devices, turn on the power to each device

individually. If you turn on the power to multiple devices

simultaneously, a temporary drop in the power voltage may occur,

possibly resulting in abnormal operation of the devices.

CAUTION

Suspended installation

If you plan to suspend your DXR series speaker, attach

commercially-available eye bolts to the screw holes (which

are sealed at the time of shipment) located on the top (two

7˚

locations) and on the lower part of the rear (one location).

The size of the screw holes on the DXR15 and DXR12 is

0˚

M10 (for an eye bolt length of 18mm or less). The size of

the screw holes on the DXR10 and DXR8 is M8 (for an eye

bolt length of 15mm or less). Keep in mind that you will

need three eye bolts to suspend it. Make sure to use the

eye bolts according to the standards and safety

regulations in your area.

DXR15/DXR12/DXR10/DXR8/DXS15/DXS12 Owner's Manual

Power switch

Rapidly turning the unit on and off in

succession can cause it to malfunction. After

turning the unit off, wait for about 5 seconds

before turning it on again.

Before doing any installation or construction

work, consult with an installation expert.

When choosing the installation location,

CAUTION

suspension wire and mounting hardware, make

sure all are strong enough to support the

weight of the speaker.

Some fittings may deteriorate over extended

periods of time due to wear and/or corrosion.

For optimum safety, the installation should be

checked thoroughly at regular intervals.

Yamaha cannot be held responsible for damage

or injury caused by insufficient strength of the

support structure or improper installation.

Controls and Functions