Directechs DIRECTWIRE 403.NISS08 Installation Manual - Page 9

Browse online or download pdf Installation Manual for Automobile Accessories Directechs DIRECTWIRE 403.NISS08. Directechs DIRECTWIRE 403.NISS08 17 pages.

Print Page

Module programming

Refer to "LED diagnostics and troubleshooting" for more information and for troubleshooting purposes.

For

Convenience-Only

programming, see next section.

Ensure vehicle is in a safe location and cannot move forward during programming.

The harnesses must be connected in this exact order:

Connect the 14-pin.

Connect the 12-pin.

Connect the 10-pin.

When the LED turns on solid red, proceed with the next step.

Important! Do NOT press the brake pedal.

Press the Push-to-Start (PTS) button twice (2x) to turn the ignition ON.

The LED flashes green throughout the process. This can take up to 15 seconds.

The LED turns ON solid green for 3 seconds, then shuts OFF once the module has been

successfully programmed.

Press the PTS button one time (1x) to turn the ignition OFF.

You have successfully completed the module programming sequence.

403.NISS08 1.27 2014 Nissan Altima (Smart Key)