Ecoplus MAG DRIVE UTILITY PUMP 900 GPH Instructions Manual - Page 3

Browse online or download pdf Instructions Manual for Water Pump Ecoplus MAG DRIVE UTILITY PUMP 900 GPH. Ecoplus MAG DRIVE UTILITY PUMP 900 GPH 12 pages.

Print Page

See illustration below. *Represents a Drip Loop and not an actual pump setup.*

The following restrictions apply to the unit:

• NEVER use this unit to pump fluids other than water

• NEVER run this unit without water

• DO NOT use for commercial or industrial purposes

• DO NOT use in conjunction with chemicals, foodstuff, easily flammable or

explosive substances.

Usage Caution

A. Before operation:

1. Check that the power voltage and frequency conforms to the power ratings on

the nameplate.

2. Don't lift, lower or carry pump by power cable.

3. Always switch off power main before doing any maintenance or placing your

hands in water.

4. Do not add any lubricant to pump. Do not operate the pump without water.

This will severely damage the pump.

5. Do not use pump with water temperature that is higher than 100ºF, as it will

shorten the expected life of the pump.

6. Unplug power to pump before performing maintenance or examining.

B. The pond pump should not be used if:

1. Power supply cord or other important parts are damaged in any way.

2. If cord is damaged, pump should not be used and discarded.

3. Pump has a wet plug or a wet receptacle.

4. Water discharge from pump is reduced.

5. A part is broken and water leaks in.

6. Anything abnormal occurs.

C. During operation

1. Shut off power immediately to prevent motor from burning out when motor is

overloaded due to clogging of foreign material.

2. Please consult store where you purchased unit, if pump is not working

properly. Do not disassemble or assemble this unit, as it may result in

motor damage.