Yamaha YSP-CU2700 Quick Reference Manual - Page 10
Browse online or download pdf Quick Reference Manual for Speaker System Yamaha YSP-CU2700. Yamaha YSP-CU2700 21 pages.
Print Page
- 1. Important Safety Instructions
- 2. Supplied Accessories
- 3. Preparing Remote Control
- 4. Installing the Batteries
- 5. Recommended Place for Installation
- 6. Example for Installing the Unit
- 7. Installing the Stands
- 8. Raising the Antenna
- 9. Connecting a TV and BD/DVD Player
- 10. Turning on the Unit
- 11. Auto Setup for Appropriate Surround Effects (Intellibeam)
- 12. Installing the Intellibeam Microphone
- 13. Playback with Surround Sound
- 14. Enjoying Three-Dimensional Surround Sound (CINEMA DSP)
1 2 3 4 5
b
Connections
Connecting a TV and BD/DVD player
For the cable connection, follow the procedure below.
Video signals
Audio signals
Use an optical digital audio cable
when connecting a TV that does
not support Audio Return
Channel.
1. Remove the cap
2. Check the direction of
the plug
INTELLIBEAM
SYSTEM
SUBWOOFER
R AUX1 L
AUX2
MIC
CONNECTOR
OUT
HDMI
INTELLIBEAM
SYSTEM
SUBWOOFER
R AUX1 L
AUX2
TV
NETWORK
OUT (ARC)
IN 1
IN 2
IN 3
UPDATE ONLY
MIC
CONNECTOR
OUT
See pages 25 to 26 in the Owner's Manual when connecting other playback devices such as
a game console.
10
b Connections
En
HDMI INPUT
OPTICAL
1
2
3
OUTPUT
2
1
HDMI
TV
NETWORK
OUT (ARC)
IN 1
IN 2
3
To an AC wall outlet
1
TV
2
HDMI
OUTPUT
3
BD/DVD player, or set-top box
Audio Return Channel (ARC) supported TV
• Connect an HDMI cable to the audio return channel supported jack (the jack with
IN 3
UPDATE ONLY
• Enable the HDMI control function of this unit to activate the Audio Return
What is Audio Return Channel (ARC)?
• In order for the unit to play audio from a TV, the TV must usually be connected to
HDMI cable (optional)
The digital audio/video signals from the BD/DVD player
are input to this unit.
• This unit supports HDCP version 2.2, a copy protection technology.
HDMI cable (optional)
Digital video from the BD/DVD player is displayed on the
TV.
• Connect the unit to the HDMI input jack (one compatible with HDCP 2.2)
on an HDCP 2.2-compliant TV to enjoy playback of 4K video.
Power cable
Plug the unit's power cable into an AC wall outlet after all
the connections are complete.
"ARC" indicated) on TV.
Channel (ARC). See page 80 in the Owner's Manual.
the unit via an audio cable as well as an HDMI cable. If, however, the TV
supports Audio Return Channel (ARC), TV audio signals can be input to the unit
via the HDMI cable that outputs video signals from the unit to the TV.
For a wired network connection, connect one end of the network
cable to the NETWORK jack on the rear panel of the unit and the
other end to a router. For details, see page 27 in the Owner's
Manual.