Caliber MCD 165 Instruction Manual - Page 7

Browse online or download pdf Instruction Manual for Car Receiver Caliber MCD 165. Caliber MCD 165 19 pages. Car cd/mp3 player / rds receiver

Print Page
Caliber MCD 165 Instruction Manual

4. WIRING DIAGRAM

FUSE
20-PIN
AUDIO/POWER
HARNESS
(See Figure 1)
7
8
7
8
5
6
5
6
3
4
3
4
1
2
1
2
Figure 1
ISO CONNECTOR 4 PIN+8 PIN
FEMALE WITH MALE TERMINAL
ISO CONNECTOR WIRING CHART
PIN
WIRE COLOR
A4
YELLOW
A5
BLUE
RED
A7
A8
BLACK
B1
VIOLET
B2
VIOLET/BLACK
B3
GREY
B4
GREY/BLACK
B5
WHITE
B6
WHITE/BLACK
B7
GREEN
B8
GREEN/BLACK
REAR LINE OUT
GREY
ISO
CONNECTOR
(See Figure 1)
FUNCTION/LABEL
BATTERY(+)
POWER ANTENNA
IGNITION(ACC)
GROUND
RIGHT REAR SPEAKER (+)
RIGHT REAR SPEAKER (-)
RIGHT FRONT SPEAKER (+)
RIGHT FRONT SPEAKER (-)
LEFT FRONT SPEAKER (+)
LEFT FRONT SPEAKER (-)
LEFT REAR SPEAKER (+)
LEFT REAR SPEAKER (-)
ANTENNA SHOCKET
(OPTION)
RCA-TO-RCA CABLES
(not supplied)
WHITE
RED
WARNING Connecting the ISO Connector
The pin arrangement for the ISO connectors depends on the type of vehicle you
drive.Make sure to make the proper connections to prevent damage to the unit.
The default connection for the wiring harness is described in
connector pins are set as described in
1
(Default setting) The 1 pin (red) of the vehicle's ISO connector is linked with
the ignition,and the 3 pin (yellow) is connected to the constant power supply.
Unit
Ignition wire
(RED)
Battery wire
(YELLOW)
2
The 1 pin (red) of the vehicle's ISO connector is connected to the constant power
supply, and the 3 pin (yellow) is linked to the ignition.
Unit
Ignition wire
(RED)
Battery wire
(YELLOW)
3
The 3 pin (yellow) of the vehicle's ISO connector is not connected to anything,
while the 1 pin (red) is connected to the constant power supply (or both the 1(red)
and 3(yellow)pins are connected to the constant power supply).
Unit
Ignition wire
(RED)
Battery wire
(YELLOW)
When the connection is made as in
ignition key. For that reason,always make sure to turn off the unit's power when the
ignition is turned off.
To link the unit's power to the ignition,connect the ignition cable (ACC...red) to a
power source that can be turned on and off with the ignition key.
E - 6
ANTENNA
JACK
AMP
1
below. If the ISO
2
3
or
.make the connection as illustrated.
1 PIN (RED)
3 PIN(YELLOW)
1 PIN (RED)
3 PIN(YELLOW)
1 PIN (RED)
3 PIN(YELLOW)
3
above,the unit's power will not be linked to the
Vehicle
Vehicle
Vehicle