Directechs DB3 Installation Manual - Page 10
Browse online or download pdf Installation Manual for Automobile Electronics Directechs DB3. Directechs DB3 10 pages. 2011 subaru outback - 403.subaru2 1.25
Also for Directechs DB3: Installation Manual (20 pages), Installation Manual (19 pages), Installation Manual (19 pages), Installation Manual (20 pages), Instruction Manual (17 pages)
Print Page
Connecting the module
Important!
Make all the required connections to the vehicle, as described in this guide, and double check to ensure everything is correct prior
to moving onto programming.
Warning!
To take advantage of advanced features, you must use DirectLink 4.5 (and higher) or the Directechs Mobile application.
Flashing a module using your computer:
1. Connect the interface module to your computer using the XKLoader2.
2. Go to www.directechs.com using Internet Explorer, and select the Flash Module button.
3. Follow the instructions to select your vehicle, installation type, and configure your options.
4. Once you have configured the firmware options, click on the FLASH button.
Flashing a module using your smartphone or tablet:
1. Connect the interface module to your XKLoader3.
2. Launch the Directechs Mobile app on your smartphone or tablet.
3. Select FLASH YOUR MODULE and follow the on screen instructions.
When the flashing operation is successful, you can proceed with the instructions below.
D2D installation
Recommended: Connect the 10-pin, 12-pin and 14-pin harnesses to the module, then
connect the 4-pin D2D harness.
OR
W2W installation
If required: Connect the 10-pin and 12-pin harnesses to the module, then connect the 14-pin
harness to the module.
10
2
nd
4
th
1
3
st
rd
(12-pin)
(D2D)
(10-pin)
(14-pin)
2
nd
1
st
3
rd
(12-pin)
(10-pin)
(14-pin)
403.SUBARU2 1.25 2011 Subaru Outback
© 2017-01-10 Directed. All rights reserved.