Caliber RCD264BT User Manual - Page 10

Browse online or download pdf User Manual for Car Receiver Caliber RCD264BT. Caliber RCD264BT 20 pages. Cd/mp3 player car fm stereo radio

Print Page

Radio operations

To select a radio band

In tuner mode, Press the

repeatedly to select a radio broadcasting

band you would like to hear. The FM band is

toggled cyclically through the

tuning bands: ->FM 1-> FM 2 -> FM 3 -> .

Auto/ Manual tuning

- Automatic search mode:

Briefly press the

search will start. It will search upward or

downward for the strong signal radio station

within the current band. In auto tuning,

press the

Pressing and holding the

about 2 seconds until "MANUAL" appears

on LCD display, it will change into manual

search mode.

- Manual search mode:

Press the

repeatedly to manually search upward or

downward step by step for the desired radio

station within the current band.

In manual search process, if the both

buttons haven't been pressed within 5

seconds, it will change into automatic

search mode automatically, "AUTO" will be

visible on the LCD display.

To store / recall a preset radio stations

You can store up to a total of 18 FM radio

stations in the memory, manually or

automatically.

- To store a station:

- Select a band (if needed)

- Select a station by

- Press and hold a preset button ( - )

which you want to store the station for at

least 2 seconds, the current station will

be saved into the relevant preset memory

bank. When a RDS station is being

stored, the relevant PI, PS, AF list are

stored.

- To recall a station:

- Select a band (if needed).

- Press a preset button (1-6) briefly to

recall the stored station. In case of RDS

mode, the strongest AF is selected after

AF searching.

Auto store / Preset scan

- Preset scan:

BAND

button

button, the auto

button to stop tuning.

button for

button short and

buttons

1 6

Short pressing the

each preset stations in the memories of the

current band. Each preset station will blink

for 5 seconds with releasing mute, then go

to next station, finally the radio will go to

play the start preset station. Press the

again to stop preset scanning.

- Auto store:

Pressing the

AMS

seconds, it will enter auto store mode.

The whole band is scanned and the six

strongest stations are stored into the preset

memories, after scanning is finished.

RDS (Radio Data System) operations

Setting Alternative Frequencies

Press the

AF/REG

mode on or off. There are 3 state the "AF"

icon on the LCD display:

Icon "AF" off:

AF switching mode off.

Icon "AF" on:

AF switching mode on,and

has RDS information.

Icon "AF" blink:

AF switching mode on, but

RDS information is not received yet.

When AF switching mode is selected, the

radio checks the signal strength of the AF

all the time. The interval of checking time of

each AFs depends on the signal strength of

current station, from a few minute for strong

station to few seconds for weak station.

Every time that new AF is stronger than

current station, it switches over to that

frequency for very short time. Because the

mute time of AF switching or checking time

is very short, it is almost inaudible in case of

normal program. During FM mode, when AF

is on, manual store, Auto store/preset scan

function can only receive and save RDS

program.

Regional Program Operation

Press the

(REG) button for longer 2

seconds to toggle on or off region mode .

Some broadcasting stations change their

program from normal broadcasting to

regional broadcasting for a certain time

period.

When regional mode on, the radio accepts

RDS stations with regional variants,

current listening program remains

unchanged

; When regional mode off, the

radio ignores regional variants,

reception moved to the regional station

button, it scans

AMS

button for more than 2

button short toggles AF

it allows the

AMS

the