Directed Directechs DB3 Installation Manual - Page 17

Print Page

Directed Directechs DB3 Installation Manual

Feature and option list

Depending on your vehicle, some of the features and options listed below may need to be configured using the configuration tool found on

the module flashing page at www.directechs.com. The web offers more options; however, manual configuration of the features is possible

using the information on this page.

* Default option

Feat

Operation

Flashes / Option

1. No RF Output*

RFTD Output Type

2. RFTD Output

3. SmartStart

1. Driver priority*

Unlock Driver Priority

2. All

1. Disabled*

Heated Seats

2. Enabled

1. 32 °F (0 °C)*

Heated

Seats/Defroster

Temperature Control

2. 23 °F (-5 °C)

3. 41 °F (5 °C)

4. Always ON

1. High*

Heated Seats

Temperature Level

2. Low

1. Disabled

Smart OEM Alarm

Control

2. Safelock

3. Enabled*

1. Unlock Button

Trunk Control Type

Release/Motorize

3. No Trunk Release

1. Disabled*

Takeover Option

2. Enabled

403.HONDA9 2.07 2023 Honda Civic (Smart Key)

Description

Module is connected to a remote starter using a standard installation.

Module is connected to an XL202 using an RSR or RXT installation (when available).

Module is connected to SmartStart using an RSR or RXT installation (when available).

Unlocks only the driver door when the button is first pressed, and unlocks all doors when it is pressed a second

time within 5 seconds.

Unlocks all doors when the button is first pressed.

No operation.

When the feature is enabled, it will activate the Heated Seats and heated steering wheel.

When Heated Seats or Defroster feature is enabled, it will activate the feature upon remote start when

temperature is below 32 °F (0 °C).

When Heated Seats or Defroster feature is enabled, it will activate the feature upon remote start when

temperature is below 23 °F (-5 °C).

When Heated Seats or Defroster feature is enabled, it will activate the feature upon remote start when

temperature is below 41 °F (5 °C).

When Heated Seats or Defroster feature is enabled, it will activate the feature at any temperature.

When Heated Seats are activated, they will be set to HIGH.

When Heated Seats are activated, they will be set to LOW.

The OEM alarm will not be controlled by the interface upon remote start. No disarm or arm command will be

executed at the beginning or end of the sequence; it must be controlled by the Remote Starter.

Smart OEM Alarm Control will behave like a standard Safelock feature on a remote starter. It will unlock at the

beginning of the sequence, and relock after start and shutdown.

Smart OEM Alarm Control will synchronize with the OEM alarm so that it will disarm and rearm the vehicle in the

remote start sequence, only when required. Smart OEM Alarm Control will monitor the alarm and door lock

status to detect if the disarm or rearm is required. If the vehicle is unlocked or is not equipped with factory alarm,

the disarm/rearm will not be executed.

When Trunk button is pressed, all doors on the vehicle will unlock.

When Trunk button is pressed on the transmitter, the motorized hatch & trunk release.

Disable takeover.

Enable takeover.