aldes InspirAIR Top 450 Classic Assembly Instructions Manual - Page 7

Browse online or download pdf Assembly Instructions Manual for Heating System aldes InspirAIR Top 450 Classic. aldes InspirAIR Top 450 Classic 14 pages.

Print Page

Reference

Internal preheating coil cable feedthrough

Attachment points for Rilsan cable ties (not supplied)

Recommendation: separate the power cables

Attachment points for internal preheating coil static relay

Classic cradle fastening point (Classic only)

4.9. Connecting condensates

The water trap connection delivered with the unit must be screwed in by drilling the product's body on the side identiﬁed A or B depending on the product

conﬁguration (see point 4.3).

An airﬂow water trap (membrane or ball) is mandatory. U-bend water traps are strictly prohibited. It is forbidden to glue the connectors together.

Connections must be made with seal connectors as below: (the water trap kit and the elbow are accessories)

5. STARTING/ADJUSTMENTS

5.1. Starting

The product must without fail be conﬁgured by one of these two interfaces:

- Aldes InspirAIR

remote control

- Aldes Conﬁgurator

Refer to the documents on these elements

The unit will not operate if it is not started successfully

Function

from the signal cables