Caliber 13579 Assembly Instructions Manual - Page 7

Browse online or download pdf Assembly Instructions Manual for Automobile Accessories Caliber 13579. Caliber 13579 8 pages. Sled wheels
Also for Caliber 13579: Assembly Instructions Manual (10 pages)

Print Page

5. Grab one Sled Wheel assembly by the handle, hold it vertically, and slide the fingers under the ski until the wheel

axle is in line with the spindle axle. You may need to lift the ski loop to create space under the ski. Rotate the

assembly down to raise the ski and check the length of the telescoping handle. Adjust as necessary to keep the

Sled Wheels axle and the spindle axle in line.

6. When the handle and saddle are in place,

and the Sled Wheels assembly is

installed onto the ski, the latch should

swing open and close around the ski

loop. Slide the latch up until it just

touches the ski loop and tighten the

screw. Do not over-tighten.

7. Fine adjustment: If the ski tips forward or backward, Sled Wheels need slight adjustments. If the ski tips

forward, the Sled Wheels axle is behind the ski spindle axle. Shorten the telescoping handle until the two axles

line up. Conversely, if the ski tips backwards, lengthen the telescoping handle. Also, check your ski bushings;

they should be tight and not worn. Good bushings will help your ride and help keep your ski horizontal when

riding with Sled Wheels.

8. Adjust the second assembly to the same locations as the first.

- Page 7 -

CI05067, rev B