Caliber 13579 Assembly Instructions Manual - Page 5

Browse online or download pdf Assembly Instructions Manual for Automobile Accessories Caliber 13579. Caliber 13579 10 pages. Sled wheels
Also for Caliber 13579: Assembly Instructions Manual (8 pages)

Print Page

6. Place a ¼" square nut (15) in the T-slot of the T-Handle and then slide a Telescoping handle onto the T-handle,

lining up the nut with the hole in the Telescoping Handle. Install a ¼-20 x 0.5" screw (12) and ¼" washer (16).

Use Table 2 to find the extension for your ski. Move the telescoping handle to the correct location per the table.

The image below shows the end of the telescoping handle at 7". Tighten the screw (approximately 4 ft-lbs). If

your ski is not in the table, the saddle/latch should be at about 7-8", and the handle will be adjusted to fit the ski

later.

- Page 5 -

Assembled on May 19, 2020

CI05067, rev E