Directed Xpresskit DBALL2 Installation Manual - Page 15

Browse online or download pdf Installation Manual for Automobile Accessories Directed Xpresskit DBALL2. Directed Xpresskit DBALL2 16 pages. Ford5 remote start ready (rsr) installation
Also for Directed Xpresskit DBALL2: Installation Manual (12 pages), Installation Manual (19 pages), Installation Manual (18 pages), Manual (14 pages), Installation Manual (13 pages), Installation Manual (14 pages), Installation Manual (19 pages), Installation Manual (20 pages), Installation Manual (15 pages), Installation And Quick Reference Manual (16 pages), Installation Manual (18 pages), Installation Manual (16 pages), Installation Manual (18 pages), Installation Manual (16 pages), Manual (19 pages), Installation Manual (11 pages), Installation Manual (10 pages)

Print Page
Directed Xpresskit DBALL2 Installation Manual

Quick Reference Guide

DBALL2-
CHRYSLER11
Range Extender Ready (RXT)
Vehicle Takeover
Press the remote start button on the transmitter to
1
start the vehicle.
*
Press the Unlock button on the factory
2
or aftermarket remote.*
Enter the vehicle, while making sure the
factory remote is inside with you.
3
Press t
he
Push-to-Start (
T
he
Push-to-Start (
PTS
)
to flash.
Press
the brake pedal,
put
4
in gear and drive off.
* Your aftermarket remote may differ from the model shown in the illustrations.
Pit Stop/idle Mode
The vehicle pit stop/idle mode feature is not available in this firmware.
remote start
Press Unlock
button
on
either remote*
Enter vehicle
with Smart Key
PTS
)
button
.
button will
start
ENGINE
PUSH 1
x
START
STOP
the car
Ready to
drive off
Installation
Range Extender Ready (
Range Extender Ready (
by factory remote starters. The interface connects to the vehicle and
Press
uses the same code as the factory remote to remote start the vehicle.
button
*
The runtime and features are identical to the
Some of the advantages of
compatibility.
OR
RXT Operations
The following table describes the behavior of the vehicle in relation to the RXT
feature. The following commands are performed on the aftermarket remote.
Command
Start
Start
ENGINE
Runtime
&
START
STOP
T
he runtime is
equivalent to the amount set for the
Flashes
be modified in some vehicles (refer to your vehicle owner's manual for more
information).
Runtime Reset
T
he Runtime Reset feature allow the user to
value. This can only performed
RXT
)
RXT
) is used to amplify the distance covered
RXT
are greater remote range and 2-way
Engine
Result
NOT running.
The engine will be started.
Running.
The engine will be stopped.
OEM
s
return the runtime to its predefined
ONCE
per remote start.
OEM
remote starter.
remote starter which
,
can
© 2017 Directed. All rights reserved.