Clarke 3110375 Operation & Maintenance Instructions Manual - Page 5

Browse online or download pdf Operation & Maintenance Instructions Manual for Power Tool Clarke 3110375. Clarke 3110375 17 pages. Air stapler

Print Page

4. Maintain power tools. Check for misalignment or binding of moving parts,

breakage of parts and any other condition that may affect the power tool's

operation. If damaged, have the power tool repaired before use. Many

accidents are caused by poorly maintained power tools.

5. Use the power tool, accessories and tool bits etc. in accordance with these

instructions, taking into account the working conditions and the work to be

performed. Use of the power tool for operations different from those

intended could result in a hazardous situation.

6. Have your power tool serviced by a qualified repair person using only

identical replacement parts. This will ensure that the safety of the power

tool is maintained

STAPLER SPECIFIC SAFETY WARNINGS

1. Always assume that the machine contains staples. Careless handling of the

stapler can result in unexpected firing of nails and personal injury.

2. Do not point the stapler towards yourself or anyone nearby. Unexpected

triggering will discharge the staples causing an injury.

3. Do not actuate the stapler unless it is placed firmly against the workpiece.

If the tool is not in contact with the workpiece, the fastener may be

deflected away from your target.

4. Disconnect the tool from the airline when the staples jam in the tool. While

removing a jammed staple, the stapler may be accidentally activated if it

is connected.

5. Do not use this stapler for fastening electrical cables. It is not designed for

electric cable installation and may damage the insulation of electric

cables thereby causing electric shock or fire hazards.

6. Never drive in staples at the edge of a work surface, as the edge could fail

and fly off, endangering yourself or others in the vicinity.

7. Never fire tool at an angle. it must be perpendicular to the work surface

TRANSPORTATION

1. Never carry the tool by the air supply hose.

2. Never carry the tool with your finger on the trigger.

STORAGE

1. When not in use the tool must be disconnected from the air supply and

stored in a dry place out of the reach of children.

2. Avoid storing the tool in environments where the temperature is below 0

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]