aerauliqa WHS500 Manual - Page 15
Browse online or download pdf Manual for Fan aerauliqa WHS500. aerauliqa WHS500 20 pages.
21
22
Fig. X
Fig. X
Fig. XI
Fig. XI
Cavi per alimentazione
Fig. XIII
Fig. XII
Fig. XII
Scatola di derivazione
Junction box
(not supplied)
(Non fornita)
15
15
15
15
Power / control cable
(not supplied)
e controllo
(Non forniti)
Power and control lines
Linee potenza e controllo
(da allestire)
21
22
23
23
Fig. XII
Cavo di alimentazione
4-core power cable
a 4 conduttori
(to be installed)
6-core control cable
Cavo di controllo
a 6 conduttori
15
• Connect
stabilizing wires with
turnbuckle (21) to the
motor support using the
5mm snap-hooks (22) to
the motor support holes.
Securely fix the other
end of the stabilizing
wires to the ceiling using
the clamps (23). Fixing
screws for the ceiling/
beam are not supplied.
• With the aid of a spirit
level placed against the
downrod (2), tighten the
turnbuckles by hand
(Fig.X) in a crisscross
pattern.
Periodically check that
the fan works in the
correct position.
• Make the connection to
the power supply/control
network by connecting
the wired cables to the
motor through a junction
box (not supplied) to be
placed near the ventilation
unit. Size the cables
appropriately taking into
account
between the ventilation
L1
400 Vac
400Vac
3 ph.
unit and the power supply
3ph.
L2
50/60 Hz
50/60Hz
L3
point. The
electrical system must be
carried out by a qualified
and authorized installer, in
accordance with the local
requirements.
Fig. XIII
the
Ø3mm
the
distance
complete