Clarke 3120116 Operating & Maintenance Instructions - Page 6

Browse online or download pdf Operating & Maintenance Instructions for Power Tool Clarke 3120116. Clarke 3120116 17 pages. Ratchet wrench

Print Page

Use only clean, dry, regulated compressed air as a power source.

Air compressors used with the tool must comply with the appropriate

European Community Safety Directives.

The air hose must be rated at least 150% of the maximum operating pressure of

the tool.

For optimum performance it is recommended that a 3/8" ID airline hose is

used.

Set the tool in the OFF position before connecting it to the air supply.

A build-up of moisture or oil in the air compressor will accelerate wear and

corrosion in the air tool. Ensure any moisture is drained from the compressor

daily and the inlet filter is kept clean.

If an unusually long air hose is required, (over 8 metres), the line pressure or the

hose inside diameter may need to be increased by up to 15 psi to maintain air

pressure at the tool.

Never exceed the maximum operating pressure for the air tool. It is

recommended that air pressure to this tool does not exceed 90 psi at the air

tool when running. Higher pressures and dirty air will shorten the life of the tool

due to faster wear and is a possible safety hazard.

Check hoses for wear or damage before use.

USEFUL ACCESSORIES

A wide range of accessories are available including filter/regulators,

lubricators, high pressure hoses, etc. Contact your CLARKE dealer for further

information, or call CLARKE International on 01992 565333.

Suitable Ratchet Wrench compatible socket sets include the following are

available in the CLARKE catalogue

1700431 PRO31 10 piece 1/2" drive AF socket set

1700432 PRO32 10 piece 1/2" drive metric socket set

1700437 PRO37 7 piece 1/2" drive deep AF socket set

1700438 PRO38 9 piece 1/2" drive deep metric socket set

1700452 PRO52 6 piece 1/2" drive hex bit socket set

1700429 PRO29 9 piece 3/8" drive AF socket set

1700430 PRO30 9 piece 3/8" drive metric socket set

1700435 PRO35 8 piece 3/8" drive deep AF socket set

1700436 PRO36 8 piece 3/8" drive deep metric socket set

1700451 PRO51 6 piece 3/8" drive hex bit socket set

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]