Directed AS-RFK2300 User Manual - Page 5

Browse online or download pdf User Manual for Remote Starter Directed AS-RFK2300. Directed AS-RFK2300 8 pages. Two-way fm led remote system

Print Page

Remote-Starting your Vehicle (only with

remote starter)

Press the

button for approximately 1 second. The remote will beep once to inform you that the

vehicle has received your signal. Approximately 5 seconds later, the engine will start. The remote

will confirm the remote starter's activation by beeping 3 times.

If your vehicle does not start at the first attempt, the system will shut down, wait a few seconds and

try to start the engine again.

With the vehicle running under remote control, press the

doors. Enter the vehicle and do the following:

• Turn the ignition key to the IGNITION ON (RUN) position. (Do not turn the key to the CRANK

position while the engine is running.)

• Press the brake pedal to disengage the remote starter unit.

You are now ready to drive off.

To LOCK your doors:

Press and hold the

The remote will beep once to confirm locking of the doors and, if OEM available, arming

the alarm.

To UNLOCK your doors:

Press and hold the

The remote will beep twice to confirm unlocking of the doors and, if OEM available,

disarming the alarm.

If your vehicle has the Remote Trunk Release option, you can open the trunk by pressing

the

button until the remote beeps once.

Convenience feature (compatible bypass module only): Idle Mode allows you to keep the

engine running and the doors locked while you stop, for example, at a convenience store or for a

short delivery.

This feature allows you to let the remote starter take over control of the vehicle (i.e. no Key in the

Ignition Switch) while the engine is running.

User Guide

button for approx. 1 sec.

button to disarm and unlock the

P.5