Clarke 3400757 User Instructions - Page 4

Browse online or download pdf User Instructions for Power Tool Clarke 3400757. Clarke 3400757 13 pages. Hot air gun

Print Page

5. Before further use of the tool, it should be carefully checked to determine

that it will operate properly and perform its intended function. Check for

alignment of moving parts, binding of moving parts, breakage of parts,

mountings or other condition that may affect its operation.

6. Have defective switches repaired by an authorised service centre. Do not

use a power tool if the switch does not turn it on and off.

7. Always check for any damage or any condition that could affect the

operation of the tool. Damaged parts should be properly repaired.

8. Have your tool repaired by a qualified person. This tool complies with the

relevant safety rules. Repairs should only be carried out by qualified

persons using original spare parts, otherwise this may result in considerable

danger to the user.

9. Never use this product for any other purpose than that described in this

booklet.

10. Never abuse the power cable by yanking the cable to disconnect it from

the socket. Keep the cable away from heat, oil or sharp edges.

11. Guard against electric shock. Avoid body contact with earthed or

grounded surfaces.

12. If the tool should be used outdoors, use only extension cables intended for

outdoor use and marked accordingly.

13. Avoid accidental starting by making sure the power switch is off before

plugging in the power cable.

ADDITIONAL SAFETY RULES FOR HOT AIR GUNS

CAUTION: WITH ALL MACHINES, THERE ARE CERTAIN HAZARDS

INVOLVED WITH THEIR OPERATION AND USE. EXERCISING RESPECT AND

CAUTION WILL CONSIDERABLY LESSEN THE RISK OF PERSONAL INJURY.

HOWEVER, IF NORMAL SAFETY PRECAUTIONS ARE OVERLOOKED, OR

IGNORED, PERSONAL INJURY TO THE OPERATOR, OR DAMAGE TO

PROPERTY MAY RESULT.

1. Always keep the mains cable well away from the hot air gun, particularly if

laying it down temporarily during use.

2. Always switch the hot air gun OFF after use and allow it to cool before

storing. Support on its stand with the nozzle pointing upwards.

3. Never leave the hot air gun unattended when it is switched on.

4. Always wear safety gloves and never touch the hot nozzle.

5. Never point the hot air gun at any person or animal.

6. Never use in a flammable atmosphere, e.g. where solvent vapours are

present.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]