Directed Directechs DB3 Installation Manual - Page 7

Print Page

Immobilizer interface

For vehicles with Keyless Entry you must remove battery from OEM key (the OEM remote may differ from the models shown in

the illustrations).

Method 1: Key Wrap

Note:

- Your OEM remote may differ from the model shown in the illustrations.

- Remove Battery from OEM FOB prior to performing the Key Wrap.

- Make 4-6 loops and place them around the front of the plastic body of the vehicle's coded key as shown above.

- Test and secure mounted loops before reassembling the vehicle.

Method 2: Immobilizer interface using 556UXL

556UXL is sold SEPARATELY.

Note: The discontinued 556U or 556UW can

still be used for the installation.

Common Relay 2: Yellow/Red: 11

NO Relay 2: Brown/Red: 12

IMPORTANT!:

Not all OEM remotes can be inserted in 556UXL because of their size.

Make sure the key will fit, otherwise it is recommended to use a different method.

403.VW15 2.00 2020 Volkswagen Tiguan

4-6 loops

Move 556UXL loop as close to the

front of ignition cylinder (OEM

Immobilizer Receiver) as possible.

Test and secure mounted loop

before reassembling the vehicle.

Common Relay 2: Yellow/Red: 11

NO Relay 2: Brown/Red: 12

Remove battery from

OEM Remote Control

4-6 loops

Black/White - NOT USED

Black/Red

Black

N/A: Green, pin 6

N/A: Violet, pin 5

(-) Ground: Black, pin 4

N/A: Pink, pin 3

(-) GWR: Blue, pin 2

(+)12V : Red, pin 1

(+)12V

OEM

Immobilizer

Receiver