Directed Directechs DB3 Installation Manual - Page 4

Print Page

Pre-installation and application warnings

This section highlights important information for this specific firmware and will assist in pricing accordingly, as

START

HERE

well as bringing awareness to any operational or vehicle limitations.

Compatibilities and Requirements

T-Harness

T-Harness is not compatible.

compatible

Vehicle Takeover

Firmware notes

Security light: Will flash during runtime and turn on solid, then off during takeover procedure.

Power door locks: Will not operate properly if doors are open.

Unless specified otherwise, all connectors are displayed from the wire side, with the exception of the OBDII diagnostic connector.

Refer to the Vehicle connections following the installation diagram.

Footnotes

[1] Hood pin: The installation of an aftermarket hood pin is only required on vehicles that are not equipped with a factory hood pin, or if

not supported in data.

[2] Tach: Optional connection required on some remote starters, which do not support a tach signal in D2D.

[3] Security Light Interrupt: Only required if Security Light Off does not operate in data.

403.NISS08 1.27 2016 Nissan Pathfinder (Smart Key)

Refer to the Quick Reference Guide section for more details.

Keys required for

Keys required

programming

for operation