Directed Directechs DB3 Installation Manual - Page 18

Print Page

Directed Directechs DB3 Installation Manual

Quick Reference Guide

Sending commands to your vehicle

Whether you want to remote start the engine, lock/unlock the doors or pop the trunk,

there are 3 possible ways you can send commands to your vehicle, using the:

•

Factory remote.

•

Aftermarket remote.

•

Directed SmartStart application via your smartphone.

If applicable, you can also start the engine remotely by pressing the Lock button 3

times quickly on your factory remote.

Vehicle takeover

The vehicle takeover feature is not available in this firmware. The vehicle engine will

shut down as soon as a door is opened.

Pit stop/idle mode

Stop the vehicle in a safe parking spot and put the

gear in Park (P).

Press the Remote Start button on the transmitter.*

The parking lights will flash once to indicate the

vehicle is now in Pit Stop Mode.

It is safe to leave the engine running and exit the

vehicle with the factory remote in hand.

Note: We recommend that you always lock the

doors of your vehicle when leaving it unattended.

* Icon and remote appearance may differ depending on the model purchased.

403.TL1 5.07.106 2013 Toyota Highlander (Smart Key)

List of available commands

Note that the information below is for many Viper, Clifford, Python, Avital, Automate,

Autostart and AstroStart models. Icons and commands may differ depending on the

model and options purchased. Refer to your authorized installation center for more

specific information.

Button(s)

* Icon and remote appearance may differ depending on the model purchased.

Notes

Put

gear in

Park

14:36

Parking lights flash x1

Press Remote

Start button*

14:36

Exit vehicle

with remote

Actions

Press & hold for 1 second to lock.

Press & hold for 1 second to unlock.

Press & hold for 1 second to remote start.

* Press & hold for 5 seconds to activate the trunk release (optional).