Clarke CAT109 (3/8) Operating And Maintenance Instructions Manual - Page 5
Browse online or download pdf Operating And Maintenance Instructions Manual for Power Tool Clarke CAT109 (3/8). Clarke CAT109 (3/8) 16 pages. Reversible ratchets 1/2" and 3/8"
Print Page
• Always disconnect from the air supply when:
a)
Performing any maintenance.
b)
The tool is not in use.
c)
The tool will be left unattended.
d)
Moving to another work area.
• Avoid damaging the tool for example by applying excessive force.
• ALWAYS maintain the tool with care. Keep it clean for best and safest
performance.
• Quick change air-line couplings should not be located at the tool. They
add weight and could fail due to vibration.
• DO NOT force or misuse the tool. It will do a better and safer job at the
rate for which it was designed.
• This tool vibrates during use. Vibration may be harmful to your hands or
arms. Stop using the tool if discomfort, a tingling feeling or pain occurs and
seek medical advice before resuming use.
TRANSPORTATION
• Never carry the tool by the air supply hose.
• Never carry the tool with your finger on the trigger.
STORAGE
• When not in use the tool must be disconnected from the air supply and
stored in a dry place out of the reach of children (preferably in a locked
cabinet).
• Avoid storage in environments where the temperature is below 0
AIR SUPPLY REQUIREMENTS
WARNING: COMPRESSED AIR CAN BE DANGEROUS. ENSURE THAT YOU
ARE THOROUGHLY FAMILIAR WITH ALL PRECAUTIONS RELATING TO THE
USE OF COMPRESSORS AND COMPRESSED AIR SUPPLY.
• Air compressors used with the tool must comply with the appropriate
European Community safety directives.
• Use only clean, dry, regulated compressed air as a power source.
• A build up of moisture in the air compressor will accelerate wear and
corrosion in the moving parts. Ensure any moisture is drained from the
compressor daily and the inlet filter is kept clean.
5
o
C.