Clarke CAT141 Operating & Maintenance Instructions - Page 12
Browse online or download pdf Operating & Maintenance Instructions for Power Tool Clarke CAT141. Clarke CAT141 17 pages. Air impact wrench
Also for Clarke CAT141: Operating & Maintenance Instructions (17 pages)
Print Page
STORAGE
If the tool is to be stored, or is idle for longer than 24 hours, run a few drops of
Clarke air line oil into the air inlet, and run the tool for 5 seconds in order to
lubricate the internal parts.
When not in use, disconnect from air supply, clean & store in a safe, dry place.
SPECIFICATION
Model Number
Part Number(s)
Min. Hose Size (ID)
Max Operating Pressure
Air Consumption
Max No Load Speed
Max Torque
Air Inlet Size
Sound Pressure Level (LpA dB)
Sound Power Level (LwA dB)
Vibration Levels
Weight(s)
Wrench Dimensions (L x W x H)
Please note that the details and specifications contained herein are correct
at the time of going to print. However Clarke International reserve the right to
change specifications at any time without prior notice.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
CAT131/CAT132
3120145 / 3120146
3/8" BSP
90 psi (6.2 bar)
18 cfm (max @90psi) average 6.5 cfm
7000 rpm @ 90psi
680 Nm (500 ft/lb)
1/4"BSP
87 dB(A)
98 dB(A)
2
4.35 m/s
(uncertainty factor K= 1.5m/s
2.6 kg (CAT131)
4.2 kg complete (CAT132)
210 x 190 x 90 mm
12
2)