Clarke CAT52 Operating & Maintenance Instructions - Page 12
Browse online or download pdf Operating & Maintenance Instructions for Power Tool Clarke CAT52. Clarke CAT52 17 pages. 4” angle grinder
Also for Clarke CAT52: Operation & Maintenance Instructions Manual (6 pages)
Print Page
When not in use, disconnect from air supply, clean tool and store in a safe, dry
place. When storing, ensure the blanking plug is replaced on the airline
connector once the airline is disconnected.
ACCESSORIES
A wide range of accessories is available including filter/regulators, lubricators,
high-pressure hoses (5 to 50 metres) etc.
Contact your CLARKE dealer for further information or CLARKE International
Service Department.
SPECIFICATIONS
Model Number
Weight
Disc Type
Air Inlet Size
Hose size
Operating Pressure
Air Consumption
No Load Speed
Sound Pressure Level (LpA dB)
Vibration Levels
Please note that the details and specifications contained herein are correct at the time
of going to print. However CLARKE International reserve the right to change
specifications at any time without prior notice. Always consult the machine's data plate.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
CAT52
3.1lbs (1.8 kg)
4" x 1/4" (type27 depressed centre)
1/4"BSP (female)
3/8" ID
90 psi (6.2 bar)
6 cfm average
11000 rpm @ 90psi
90.4 dB(A)
2
0.514 m/s
12