Clarke CCRT266 Operation & Maintenance Instructions Manual - Page 3

Browse online or download pdf Operation & Maintenance Instructions Manual for Power Tool Clarke CCRT266. Clarke CCRT266 17 pages. Cordless rotary tool kit

Clarke CCRT266 Operation & Maintenance Instructions Manual

SAFETY PRECAUTIONS

WARNING: READ ALL INSTRUCTIONS. FAILURE TO FOLLOW ALL
INSTRUCTIONS LISTED BELOW MAY RESULT IN ELECTRIC SHOCK, FIRE AND/
OR SERIOUS INJURY. THE TERM "POWER TOOL" IN ALL WARNINGS LISTED
BELOW REFERS TO YOUR BATTERY OPERATED (CORDLESS) POWER TOOL.

WORK AREA

1. Keep work area clean and well lit. Cluttered and dark areas invite accidents.
2. Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
3. Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.

ELECTRICAL SAFETY

1. Avoid body contact with earthed or grounded surfaces such as pipes,
radiators, ranges or refrigerators. There is an increased risk of electric shock if
your body is earthed or grounded.
2. Do not expose power tools to rain or wet conditions. Water entering a power
tool will increase the risk of electric shock.
3. When operating a power tool outdoors, use an extension cord suitable for
outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric
shock.

PERSONAL SAFETY

1. Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A moment of inattention while
operating power tools may result in personal injury.
2. Use safety equipment. Always wear eye protection. Safety equipment such as
dust mask, non-skid safety shoes, or hearing protection used for appropriate
conditions will reduce personal injuries.
3. Avoid accidental starting. Ensure the switch is in the off position before
inserting the battery.
4. Remove any adjusting key or wrench before turning the power tool on. A
wrench or a key left attached to a rotating part of the power tool may result in
personal injury.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
3