Clarke Contractor CON750 Operating & Maintenance Instructions - Page 8
Browse online or download pdf Operating & Maintenance Instructions for Power Tool Clarke Contractor CON750. Clarke Contractor CON750 20 pages. Contractor jigsaw
Also for Clarke Contractor CON750: Operation & Maintenance Instructions Manual (17 pages)
Print Page
OVERVIEW
The CLARKE CON750 is a 750W variable-speed jigsaw fitted with a lock-on
button for continuous operation. It is fitted with a dust extract port for
connection to a vacuum system and is supplied with 1.8 metres of cable with
plug. The jigsaw is equipped with a T-shank SDS type quick-release blade
retention system for convenient replacement of saw blades.
When unpacking, check for damage or shortages etc. Any found should be
reported to your CLARKE dealer where the appliance was originally
purchased. This CON750 Jigsaw is supplied with the following components:
•
1 x Jigsaw
•
1 x Wood Cutting Blade
1 x Dust Extract Connector
•
1 x 3mm Hex Key
•
1 x Parallel Fence
•
1 x Instruction Manual (this document)
•
Speed Controller
Lock-on Button
Trigger
Blade Guard
Pendulum Switch
Jigsaw Blade
Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]
8
Ventilation Slots
Dust Extract
Connector
Sole Plate