Clarke CPS125 Operation & Maintenance Instructions Manual - Page 11

Browse online or download pdf Operation & Maintenance Instructions Manual for Power Tool Clarke CPS125. Clarke CPS125 17 pages. Metal shears
Also for Clarke CPS125: Quick Start Manual (2 pages)

Print Page

MAINTENANCE

WARNING: BEFORE PERFORMING ANY MAINTENANCE, SWITCH OFF AND

UNPLUG THE SANDER.

Your sander has been designed to operate over a long period of time with a

minimum of maintenance. Continuous satisfactory operation depends upon

proper care.

Regularly clean the ventilation slots using a soft dry brush or dry cloth. Only

clean the motor housing using a clean damp cloth. Do not use any abrasive

or solvent-based cleaner.

A damaged power cable should be replaced by your CLARKE dealer or

qualified electrician.

The bearings in this sander are sealed for life and require no maintenance.

FAULTFINDING

SANDER IS OVERHEATING

This indicates the machine is dirty. Clean the ventilation holes, and blow out

with compressed air. Always wear eye protection when using compressed air

Overloading the machine will also cause overheating. Do not use for heavy

duty work and do not apply heavy pressure.

EXCESSIVE SPARKING OCCURS

This indicates worn brushes. This problem is quickly remedied but you should

consult your CLARKE dealer for parts and advice.

SANDER DOES NOT OPERATE WHEN SWITCHED ON

Check to ensure the fuse is sound and replace if necessary. If the fuse

is sound or blows repeatedly, consult your CLARKE dealer.

POOR ABRASION

If the sander is not removing material efficiently, check the sanding paper. If

the abrasive is worn down replace the paper. The paper must always be

stored in a dry place as if it allowed to become damp, the abrasive particles

will detach from the paper and will not abrade.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]