Directed Directechs DB3 Installation Manual - Page 12

Print Page

Module programming

Refer to "LED diagnostics and troubleshooting" for more information and for troubleshooting purposes.

Wait until the LED turns ON solid red.

Note: To skip the transponder programming and use convenience features only, press

the programming button 5 times. When the LED turns ON solid orange, proceed to

step 2.

Insert and turn the key to the ON position. The LED starts flashing green after

approximately 5 seconds.

Start the vehicle.

The LED turns ON solid for 3 seconds:

Orange: The bypass has successfully programed WITHOUT statuses.

Green: The bypass has successfully programed WITH statuses.

Turn the ignition OFF and remove the key.

You have successfully completed the module programming sequence.

Wait until the LED turns ON solid red.

Note: To skip the transponder programming and use convenience features only, press

the programming button 5 times. When the LED turns ON solid orange, proceed to

step 2.

Important! Do NOT depress the brake pedal.

With the key inside the vehicle, press the Push-to-Start (PTS) button twice to turn the

ignition ON.

The LED will start flashing green.

Apply the brakes and press on the Push-to-Start (PTS) button once to start the engine.

The LED turns ON solid for 3 seconds:

Orange: The bypass has successfully programed WITHOUT statuses.

Green: The bypass has successfully programed WITH statuses.

Press the PTS button once more to turn the ignition OFF.

You have successfully completed the module programming sequence.

403.TL4 4.00 2012 Lexus IS 350C (Smart Key)