Directed Directechs DB3 Installation Manual - Page 13

Print Page

Directed Directechs DB3 Installation Manual

SmartStart Pro/Digital RF Kit/XL202 installation notes

The DB3 Remote Start Ready (RSR) solution offers four (4) configuration options to control your system: 3x OEM Lock Remote Start

Activation (if applicable, refer to the "vehicle function compatibilities" section), SmartStart Pro, Digital RF Kit, XL202 & Analog RF Kit (all sold

separatly). This section provides specific installation information for these solutions.

SmartStart Pro

Must have the Gray wire grounded before connecting to the D2D port.

SmarStart

Cable

Note: The SmartStart Pro is optional and must be purchased separately.

Digital RF Kit

SmarStart

The DB3 must be programmed to the vehicle before pairing.

Cable

This configuration requires the remote and the antenna to be paired by following the pairing procedure provided with the Digital RF Kit.

D2D

Cable

SmarStart

Cable

D2D

Cable

Note: The Digital RF Kit is optional and must be purchased separately.

D2D

XOVER Cable

XL202 & Analog RF Kit

D2D

Cable

Use the D2D Crossover (XOVER) cable that is provided with XL202 (not the one in the DB3 package)

Follow the XL202 Programming Guide to pair the remote to the XL202.

D2D

XOVER Cable

D2D

XOVER Cable

Note: The XL202 and antenna are optional and must be purchased separately.

403.TL8 3.06 2020 Lexus GX 460 (Smart Key)

Configuration wires (Gray & White)

Connect Gray wire to (-) Ground

5 pins

4 pins

2 pins,

not used

Configuration wires (Gray & White)

D2D (4 pins, white)

Connect Gray wire to (-) Ground

5 pins

4 pins

2 pins,

not used

Configuration wires (Gray & White)

D2D (4 pins, white)

Connect Gray wire to (-) Ground

5 pins

4 pins

2 pins,

not used

D2D (4 pins, white)

THIS SIDE UP