Directed Directechs DB3 Installation Manual - Page 19

Print Page

Directed Directechs DB3 Installation Manual

Quick Reference Guide (customer copy)

Sending commands to your vehicle

Whether you want to remote start the engine, lock/unlock the doors or pop the trunk, there

are 3 possible ways you can send commands to your vehicle, using the:

• Factory remote.

• Aftermarket remote.

• Directed SmartStart application via your smartphone.

If applicable, you can also start the engine remotely by pressing the Lock button 3 times

quickly on your factory remote.

Vehicle takeover with regular key

Close the vehicle doors, hood and trunk, then send the

Remote Start command to start the vehicle.*

Send the Unlock command on the factory or aftermarket

remote.*

Enter the vehicle, insert your key in the ignition barrel, and

turn it to the ON position.

Depress the brake pedal, put the car in gear and drive

off.

* Icon and remote appearance may differ depending on the model purchased.

403.TL10 2.32 2015 Toyota RAV4 (H Key)

Press Remote

Start button*

Press Unlock on

either remote*

Key OUT

Key IN

START

Enter

vehicle

Ready

to drive

off

Pit stop/idle mode

Stop the vehicle in a safe parking spot and put the gear

in Park (P).

Press the Remote Start button on the transmitter.*

The parking lights will flash once to indicate the vehicle is

now in Pit Stop Mode.

It is safe to leave the engine running and exit the vehicle

with the factory remote in hand.

Note: We recommend that you always lock the doors of

your vehicle when leaving it unattended.

14:36

* Icon and remote appearance may differ depending on the model purchased.

14:36

List of available commands

Note that the information below is for many Viper, Clifford, Python, Avital, Automate,

Key IN

START

Autostart and AstroStart models. Icons and commands may differ depending on the model

START

and options purchased. Refer to your authorized installation center for more specific

information.

Button(s)

Actions

Press & hold for 1 second to lock.

Press & hold for 1 second to unlock.

Press & hold for 1 second to remote start.

* Press & hold for 5 seconds to activate the trunk release (optional).

* Icon and remote appearance may differ depending on the model purchased.

Put

gear in Park

Parking lights

Press

flash x1

Remote

Start

button*

14:36

Exit

vehicle

with

remote