Zanussi DR 60/L User Manual - Page 5

Browse online or download pdf User Manual for Refrigerator Zanussi DR 60/L. Zanussi DR 60/L 7 pages. Refrigerators
Also for Zanussi DR 60/L: Instructions For The Use And Care (16 pages), Use And Care And Installation Instructions (16 pages)

Print Page

Features

 Digital Control

- The appliance provides the user with a full control of

the desired water temperature to satisfy his/her

needs.

 Maintenance free tank

- This appliance tank is not equipped with a

magnesium anode, so no need to service the tank

periodically.

 Anti-Burn system

- The appliance will detect any abnormal temperature

increase and disconnect the heating element to

protect it from damage

When this occurs, an E2 signal will blink

continuously on the appliance LED screen and

beep sound will be heard for 60 seconds.

 Over heating Protection

- If water temperature increased above 90°C the

control unit will stop heating process to protect the

user and appliance from overheated water.

Maintenance

The water heater requires no special maintenance, no anode change. The safety limiter, which cuts both phases

and leaves the water heater without voltage; protect the appliance from excessive heating due to a possible

thermostat fault.

If this case occurred, you must call the Service Center for it to be repaired

The MANUFACTURER reserves the right to modify the characteristics and specifications of its products, without prior notice.

Care and cleaning

 All the repair and maintenance must be carried out by

customer service authorized technicians.

 A clean soft cloth or wet sponge can be used for the

cleaning

www.zanussi.com

When this occurs, an E3 signal will blink

continuously on the appliance LED screen and

beep sound will be heard for 60 seconds.

 Quad Safety

- The appliance is protected from overheating-

overpressure with four types of safety:

1. On board Overheating protection

2. Mechanical thermal fuse

3. Relief valve

4. Non return valve

 HD polyurethane insulation foam

- High-density polyurethane foam injected between

the inner tank and the outer shell.

1. To reduce power consumption

2. Keep heat loss controlled

The material of the foam was chosen carefully to give

the best performance for a long life.

Electric circuit

 Appliance malfunctions should be repaired on its time

to keep the performance of it.

 Dissolvent products are not allowed for the cleaning.