Clarke STRONG-ARM CSA12F Operation & Maintenance Instructions Manual - Page 4
Browse online or download pdf Operation & Maintenance Instructions Manual for Power Tool Clarke STRONG-ARM CSA12F. Clarke STRONG-ARM CSA12F 17 pages. 12 tonne hydraulic press
Also for Clarke STRONG-ARM CSA12F: Operation & Maintenance Instructions Manual (17 pages)
Print Page
ASSEMBLY
Ensure the press and its components suffered no damage during transit and
that all components are present. Should any loss or damage become
apparent, please contact your CLARKE dealer immediately.
IMPORTANT: Due to the weight of the press components, we recommend
that you get assistance during assembly.
IMPORTANT: We strongly recommend that the press be firmly secured to a
firm and level floor using expansion bolts (not supplied). Holes are provided
in the base supports for this purpose.
IMPORTANT: Do not locate your press where it will be open to the elements,
as severe weather conditions will damage the hydraulic parts.
1. Attach the feet and the bottom
cross member to the side
supports, using the nuts, bolts and
washers.
2. Add the stay bars to each side
and bolt into place.
3. Bolt one of the cross beams to the
side supports, Attach the ram
baseplate to the cross beam,
securing it with the socket
headed bolt.
4. Add the other cross beam by
sliding it along the ram baseplate
from one end.
5. Assemble loosely before
tightening all the bolts at each
end with both spring and flat washers. Position the ram baseplate centrally
and lock in position.
6. With the help of an assistant, lift the frame assembly upright and
manoeuvre it to its intended location in the workshop.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
4