Directed Directechs DB3 Installation Manual - Page 9

Browse online or download pdf Installation Manual for Car Alarm Directed Directechs DB3. Directed Directechs DB3 18 pages. Smart key for 2013 toyota highlander
Also for Directed Directechs DB3: Installation Manual (20 pages), Installation Manual (19 pages), Manual (6 pages), Installation Manual (18 pages), Installation Manual (18 pages), Installation Manual (19 pages), Installation Manual (20 pages), Installation Manual (19 pages), Installation Manual (20 pages), Installation Manual (10 pages), Installation Manual (19 pages), Installation Manual (19 pages), Installation Manual (20 pages), Installation Manual (20 pages), Installation Manual (20 pages), Installation Manual (10 pages), Installation Manual (20 pages), Installation Manual (20 pages), Installation Manual (19 pages), Installation Manual (20 pages), Installation Manual (20 pages), Installation Manual (18 pages), Installation Manual (20 pages), Installation Manual (19 pages), Installation Manual (19 pages), Installation Manual (18 pages), Installation Manual (19 pages), Installation Manual (20 pages), Installation Manual (18 pages), Installation Manual (19 pages), Installation Manual (20 pages), Installation Manual (20 pages), Installation Manual (20 pages), Installation Manual (20 pages), Installation Manual (19 pages), Installation Manual (20 pages), Installation Manual (18 pages), Installation Manual (19 pages), Installation Manual (20 pages), Installation Manual (17 pages), Installation Manual (20 pages), Installation Manual (18 pages)

Print Page
Directed Directechs DB3 Installation Manual

Module programming

Refer to "LED diagnostics and troubleshooting" for more information and for troubleshooting purposes.
Wait until the LED turns ON solid red.
Note: To skip the transponder programming and use convenience features only, press the
1
programming button 5 times. Wait until the LED turns ON solid orange, then proceed with
step 2.
Important! Do NOT depress the brake pedal.
Press the Push-to-Start (PTS) button once to turn the ignition ON. The LED turns ON solid
2
green for 3 seconds, then shuts OFF.
If the transponder programming was skipped, the LED turns ON solid orange for 3 seconds
then shuts OFF when programming is done.
Press the PTS button once more to turn the ignition OFF, once the module is successfully
3
programmed.
You have successfully completed the module programming sequence.
9
403.NISS06 3.27 2016 Nissan Rogue (Smart Key)
©2023 Directed. All rights reserved.