Directed Directechs DB3 Installation Manual - Page 17

Print Page

Feature and option list

Depending on your vehicle, some of the features and options listed below may need to be configured using the configuration tool found on

the module flashing page at www.directechs.com. The web offers more options; however, manual configuration of the features is possible

using the information on this page.

* Default option

Feat

Operation

Flashes / Option

1. No RF Output*

RFTD Output Type

2. RFTD Output

3. SmartStart

1. Driver priority*

Unlock Driver Priority

2. All

1. Disabled

Smart OEM Alarm

Control

2. Safelock

3. Enabled*

1. Type1*

Brake Status

2. Type2

403.SUBARU1 1.38 2008 Subaru Impreza

Description

Module is connected to a remote starter using a standard installation.

Module is connected to an XL202 using an RSR or RXT installation (when available).

Module is connected to SmartStart using an RSR or RXT installation (when available).

Unlocks only the driver door when the button is first pressed, and unlocks all doors when it is pressed a second

time within 5 seconds.

Unlocks all doors when the button is first pressed.

The OEM alarm will not be controlled by the interface upon remote start. No disarm or arm command will be

executed at the beginning or end of the sequence; it must be controlled by the Remote Starter.

Smart OEM Alarm Control will behave like a standard Safelock feature on a remote starter. It will unlock at the

beginning of the sequence, and relock after start and shutdown.

Smart OEM Alarm Control will synchronize with the OEM alarm so that it will disarm and rearm the vehicle in the

remote start sequence, only when required. Smart OEM Alarm Control will monitor the alarm and door lock

status to detect if the disarm or rearm is required. If the vehicle is unlocked or is not equipped with factory alarm,

the disarm/rearm will not be executed.

Depending on the origin of the vehicle, it could have one of two Brake Status types with the default setting as

Type 1.

If under a remote start condition the brake does not shut the vehicle down, program the Brake Status as Type 2.