Zanussi ZD 17/5 RM Instruction Booklet - Page 11

Browse online or download pdf Instruction Booklet for Refrigerator Zanussi ZD 17/5 RM. Zanussi ZD 17/5 RM 11 pages. Fridge-freezer zd 17/5 rm

Print Page

Door reversibility

1. Unplug the appliance from the power supply

before carrying out the below-mentioned

operations.

2. pull off the ventilation grille (D) which is clipped

into place;

3. remove the bottom hinge (E) by unscrewing its

fixing screws;

4. remove the lower door, sliding it out of the middle

hinge;

5. unscrew the middle hinge (H);

4. Remove the upper door by releasing it from the

top hinge pin (G).

5. Remove the pin (G) from the top hinge , then

mount these on the opposite side, after having

removed the plugs (I) which must be refitted on

the other side.

6. Replace the upper door.

7 Refit the middle hinge on the opposite side and

replace the bottom door.

8. reassemble the lower hinge (E) on the opposite

side, using the screws previously removed; slide

the hole cover (F) out of the ventilation grille (D)

by pushing it in the direction of the arrow and

reassemble it on the opposite side;

9. refit the ventilation grille (D), clipping it into

place.

To line up the doors, it is possible to adjust the

middle hinge (H) horizontally by means of a tool,

after slackening the two screws (see figure).

Warning:

After having reversed the opening direction of

the doors check that all the screws are properly

tightened and that the magnetic seal adheres to

the cabinet. If the ambient temperature is cold

(i.e. in Winter), the gasket may not fit perfectly to

the cabinet. In that case, wait for the natural

fitting of the gasket or accelerate this process by

heating up the part involved with a normal

hairdrier.