Directed Directechs DB3 Installation Manual - Page 8

Browse online or download pdf Installation Manual for Car Alarm Directed Directechs DB3. Directed Directechs DB3 19 pages. Smart key for 2013 toyota highlander
Also for Directed Directechs DB3: Installation Manual (20 pages), Installation Manual (19 pages), Manual (6 pages), Installation Manual (18 pages), Installation Manual (18 pages), Installation Manual (19 pages), Installation Manual (20 pages), Installation Manual (19 pages), Installation Manual (20 pages), Installation Manual (10 pages), Installation Manual (19 pages), Installation Manual (19 pages), Installation Manual (20 pages), Installation Manual (20 pages), Installation Manual (20 pages), Installation Manual (10 pages), Installation Manual (20 pages), Installation Manual (20 pages), Installation Manual (19 pages), Installation Manual (20 pages), Installation Manual (20 pages), Installation Manual (18 pages), Installation Manual (20 pages), Installation Manual (19 pages), Installation Manual (19 pages), Installation Manual (18 pages), Installation Manual (19 pages), Installation Manual (20 pages), Installation Manual (18 pages), Installation Manual (19 pages), Installation Manual (20 pages), Installation Manual (20 pages), Installation Manual (20 pages), Installation Manual (18 pages), Installation Manual (20 pages), Installation Manual (19 pages), Installation Manual (20 pages), Installation Manual (18 pages), Installation Manual (20 pages), Installation Manual (17 pages), Installation Manual (20 pages), Installation Manual (18 pages)

Directed Directechs DB3 Installation Manual

Vehicle connections

The connection information listed below is specific to the 2023 Kia Carnival (Smart Key). Refer to "Pre-installation and application warnings" for a list of important notes.
Data 14-pin blue connector (H1)
Module
Conn./Pin
Color
H1/1
Light Green
H1/2
Violet/Yellow
H1/3
Tan/Black
H1/4
Tan
H1/5
Orange/Green
H1/6
Orange/Brown
H1/7
Brown
H1/8
Yellow
H1/9
Orange/Yellow
H1/10
Orange/Red
H1/11
Yellow/Red
H1/12
Brown/Red
H1/13
Red
H1/14
Black
Output 12-pin red connector (H2)
Module
Conn./Pin
Color
H2/1
Black/White
H2/2
Green/Black
H2/3
Green/White
H2/4
Red/Black
H2/5
Violet/White
H2/6
Gray
H2/7
Gray/Black
H2/8
Violet/Green
H2/9
Violet/Brown
8
403.KIA10 1.10 2023 Kia Carnival (Smart Key)
©2023 Directed. All rights
Description
Single Wire CAN
J1850
[3]
(Data) HS CAN High 1
[3]
(Data) HS CAN Low 1
(Data) HS CAN High 2
(Data) HS CAN Low 2
Relay 1 N.O. - No Connection
Relay 1 COM. - Immo. Data Interr. (conn. side)
Relay 1 N.C. - Immo. Data Interr. (vehicle side)
Relay 2 N.C. - No Connection
Relay 2 COM. - (+) Ignition Output
Relay 2 N.O. - (+) 12 Volt Input
(+) 12 Volt Input
(-) Ground
Description
No Connection
[2]
(-) PTS 1 Output
No Connection
[2]
(-) PTS 2 Output
No Connection
(+) Starter Output
(+) Accessory Output
No Connection
(MUX) Parking Light Output
Connects To
Wire Location
No Connection
No Connection
ICU Junction Block-Dash Fuse Box, rear, white 32 pin plug (H), pin 21
Connection only required when installing a SmartStart with telematics
features.
ICU Junction Block-Dash Fuse Box, rear, white 32 pin plug (H), pin 22
Connection only required when installing a SmartStart with telematics
features.
ICU Junction Block-Dash Fuse Box, rear, white 32 pin plug (H), pin 7
ICU Junction Block-Dash Fuse Box, rear, white 32 pin plug (H), pin 23
No Connection
Driver Kick, white 55 pin plug (EM11), pin 16
Driver Kick, white 55 pin plug (EM11), pin 16
No Connection
ICU Junction Block-Dash Fuse Box, black 6 pin plug (B), pin 2
ICU Junction Block-Dash Fuse Box, black 6 pin plug (B), pin 6
ICU Junction Block-Dash Fuse Box, black 6 pin plug (B), pin 6
Connects To
Wire Location
No Connection
Start Stop Button Switch, white 10 pin plug, pin 1
Connecting the PTS wires will result in a "Get it and Go" takeover procedure
for the client. If not connected, the client needs to push the PTS button for
Takeover and Pit Stop mode.
No Connection
Start Stop Button Switch, white 10 pin plug, pin 7
Connecting the PTS wires will result in a "Get it and Go" takeover procedure
for the client. If not connected, the client needs to push the PTS button for
Takeover and Pit Stop mode.
No Connection
Driver Kick, white 55 pin plug (EM11), pin 11
Driver Kick, white 55 pin plug (EM11), pin 21
No Connection
Headlight-Wiper Switch, white 16 pin plug, pin 10
(+/-)
Wire Color
Data
Gray/Orange (D-CAN)
Data
Brown/Orange (D-CAN)
Data
Red (B-CAN)
Data
Blue (B-CAN)
Data
White/Black
Data
White/Black
+
Black
+
Red (50A)
+
Red (50A)
(chassis ground)
(+/-)
Wire Color
-
Yellow/Orange
-
Orange/Black
+
Pink
+
Yellow
MUX
Blue/Orange