Clarke Strong-Arm GC0915 Operation & Maintenance Instructions Manual - Page 4
Browse online or download pdf Operation & Maintenance Instructions Manual for Power Tool Clarke Strong-Arm GC0915. Clarke Strong-Arm GC0915 17 pages. 10 tonne hydraulic bench press
Print Page
UNPACKING
Ensure the press and its components suffered no damage during transit and
that all components are present. Should any loss or damage become
apparent, please contact your CLARKE dealer immediately.
TOOLS REQUIRED
• Spanners to suit M6, M8 and M10 nuts/bolts, or an adjustable wrench.
• PTFE tape
ACCESSORIES
A mandrel set (including storage bracket and pressure plate) is not supplied
with the press but is available from your dealer as Clarke part no 7615060.
INVENTORY
1 x Frame
2 x Base Supports
1 x Ram with Locking Collar
1 x Pressure Gauge
2 x Bed Support Pins
1 x Fixing Kit containing bolts, washers & nuts
ASSEMBLY
IMPORTANT: Due to the weight of the press components, we recommend
that you get assistance during installation.
IMPORTANT: We strongly recommend that the press be firmly secured to a
firm and level bench using suitable bolts (not supplied).
IMPORTANT: Do not locate your press where it will be open to the elements,
Severe weather conditions will damage the hydraulic components.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
1 x Pump
1 x Pump Handle
1 x Hose (attached to pump)
1 x Press Bed (Frame)
2 x Bed blocks (V-blocks)
4