Zanussi ZFC22/9K Instruction Booklet - Page 5

Browse online or download pdf Instruction Booklet for Refrigerator Zanussi ZFC22/9K. Zanussi ZFC22/9K 10 pages. Fridge-freezer zfc 22/9 k

Print Page

Door reversibility

Unplug the appliance from the power supply before

carrying out the below-mentioned operations.

Remove the ventilation grill (D).

Unscrew the bottom hinge (E).

Remove the freezer door by releasing it from the

middle hinge (H).

Unscrew the middle hinge.

Remove the fridge door by releasing it from the top

hinge pin (A).

Remove the pin and the washer (A+B) from the top

hinge (C), then mount these on the opposite side.

Reﬁt the fridge door.

Replace the middle hinge to the left hand side.

Replace the freezer door.

Screw down the bottom hinge (E) on the opposite

side by using the screws previously removed.

Detach the plug (F) from the ventilation grill (D). To

do this, press it in the direction of the arrow.

Introduce the plug (G), which is delivered with the

appliance, into the hole left free on the opposite

side.

Re-assemble the ventilation grill (D).

Reverse the direction of the handle.

The holes which are not used are masked by plastic

plugs which should be removed and reﬁtted onto

the free holes.

The doors can be aligned by adjusting both the

middle and top hinges.

The middle hinge can be adjusted horizontally, with

the help of a tool, after having slackened the two

screws.

The top hinge is adjusted by slackening the nut with

a 10 mm spanner and then proceeding as shown in

the Figure.

Attention

After completion of the door reversibility operation,

verify that the door gasket is adherent to the

cabinet. If the ambient temperature is cold (i.e. in

Winter), the gasket may not ﬁt perfectly to the

cabinet. In that case, wait for the natural ﬁtting of

the gasket or accelerate this process by heating up

the part involved with a normal hairdrier.

D071

D427

D426

D405