Zanussi ZI 9454 X Instruction Booklet - Page 17

Browse online or download pdf Instruction Booklet for Refrigerator Zanussi ZI 9454 X. Zanussi ZI 9454 X 20 pages. Zanussi instructrion manual freezer zi 9454 x
Also for Zanussi ZI 9454 X: Instruction Booklet (12 pages), Instruction Booklet (19 pages)

Print Page

POSITIONING

Height adjustment

The height of the appliance is adjustable from 820 to

870 mm to line up with existing kitchen units.

Before installing the appliance between units, adjust

the height of the feet and rear wheels. The wheels

are factory set for a height of 820 mm. To align the

appliance to a height of 870 mm, raise it by adjusting

the feet with a spanner, then remove the wheels and

refit them in the lowest position.

Fitting the side panels

•

Fit the brackets onto the panels in the positions

shown in the diagram. The dimension of 132 mm

is allowed for fitting a 100 mm plinth below the

panel. For different plinth sizes, reduce or

increase the dimension of 132 mm accordingly.

•

Rest the panels against the appliance.

•

Fit the rear brackets, taking into account the

thickness of the panels (maximum width of unit

900 mm).

•

For a correct alignment make sure that the

distance between the appliance and the cabinet

is of 45 mm.

•

Secure the panels at the front.

•

Check the alignment of the doors loosing the

fixing screws and by means the adjustment

bushes.

•

Add a clamp screw on the bottom hinges of the

doors.