Zanussi ZRB324WO1 User Manual - Page 12

Browse online or download pdf User Manual for Refrigerator Zanussi ZRB324WO1. Zanussi ZRB324WO1 30 pages.

Print Page

–

Put over the handle on the opposite side and

cover up the vacant holes with the plastic nails

from the bag of spare parts. (Picture 14).

–

Put the appliance to its place, set it's level with

leveling front legs, and connect it to the electricity

supply.

In case you don't want to perform the procedures

above, call the nearest brand-mark service.

Technicians will accomplish the refilling expertly

for charge.

–

Change the position of the

lower door mask cover

(Picture 8). Remove

opening mask from the work

plate and fix it to the other

side (Picture 9).

–

Install work plate back to the

refrigerator (Picture 10).

Stick label, enclosed in the

bag of spare parts, on front

of the work plate. Put the

thermostate button to front of

the work plate.(Picture 11).

–

Fix the double door holder

onto the left side using the

screws (2 pieces). Be careful

that the door edge is parallel

with the edge of the mantle

(Picture 12).

–

Fit the upper door to the

double door hinge. Fix the

upper door shaft onto the

left side using the screws

you removed previously. Be

careful that the door edge

of the refrigerator is parallel

with the edge of the top cap

(Picture 13).

Electrical connection

This refrigerator is designed to operate on

230 VAC (~) 50 Hz supply.

The plug must be put into a socket with

protective contact. If there is no such, it is

recommended to get an electrician to fit an

earthed socket in compliance with standards

near the refrigerator.

This appliance complies with the following

E.E.C. Directives:

- 73/23 EEC of 19.02.73 (Low Voltage Directive) and

subsequent modifications,

- 89/336 EEC of 03.05.89 (Electromagnetic

Compatibility Directive) and subsequent

modifications.