Zanussi ZX 56/4 SI Instruction Booklet - Page 5

Browse online or download pdf Instruction Booklet for Refrigerator Zanussi ZX 56/4 SI. Zanussi ZX 56/4 SI 10 pages. Zanussi instruction booklet refrigerator- freezer zx 56/4 w, zx 56/4 sa, zx 56/4 si
Also for Zanussi ZX 56/4 SI: Instruction Booklet (24 pages), Instruction Booklet (12 pages)

Print Page

Any electrical work required to install this appliance

should be carried out by a qualified electrician or

competent person.

If the plug that is fitted to your appliance is not

suitable for your socket outlet, it must be cut off and

the appropriate plug fitted.

Remove the fuse from the cut off plug.

The cut off plug should then be disposed of to

prevent the hazard of shocks in case it should be

plugged into a 13amp socket in another part of your

home.

The wires in the mains lead are coloured in

accordance with the following code:

If you fit your own plug, the colours of the wires in

the mains lead of your appliance may not correspond

with the markings identifying the terminals in your

plug, proceed as follows:

GREEN & YELLOW

13 AMP. FUSE

BROWN

BLUE

CORD CLAMP

D207

Connect the Green and Yellow (earth) wire to the

terminal in the plug which is marked with the letter

«E» or the earth symbol

or coloured green and

yellow.

Connect the blue (neutral) wire to the terminal in the

plug which is marked with the letter «N» or coloured

black.

Connect the brown (live) wire to the terminal in the

plug which is marked with the letter «L» or coloured

red.

The plug moulded onto the lead incorporates a fuse.

For replacement, use a 13amp BSI362 fuse. Only

ASTA or BSI approved fuses should be used.

The plug must not be used if the fuse cover/carrier is

lost. The cover/carrier is indicated by the coloured

insert at the base of the plug.

A replacement cover/carrier must be obtained from

your local Zanussi Service Force Centre.

This appliance complies with the following

E.E.C. Directives:

(Low Voltage Directive)

and subsequent modifications;

(Electromagnetic

Compatibility Directive) and subsequent

modifications.

Your appliance has an air circulation slider control

situated at the rear of the fridge compartment, which

controls the amount of cold air circulated through the

fridge compartment.

When the ambient temperature is between 10°C and

16°C, the slider control should be in the "MIN"

position.

When the ambient temperature is above 16°C the

slider control should be midway between "MIN" and

"MAX".

When the ambient temperature is very high (i.e. hot

summer days) position the slider control to "MAX".

To obtain the best performance, do not store warm

food or evaporating liquids in the refrigerator; cover

or wrap the food, particularly if it has a strong flavour.

Do not cover the shelves with any protective

material, such as paper, cardboard or plastic, which

may obstruct the air circulation.

To help you use your refrigerator correctly, here are

some more useful hints:

Raw meat (beef, pork, lamb & poultry): wrap in

polythene bags and place on the glass shelf above

the salad drawers.

Fruit & vegetables: these should be thoroughly

cleaned and placed in the salad drawers.

Butter & cheese: these should be placed in special

airtight containers or wrapped in aluminium foil or

polythene bags to exclude as much air as possible.

Milk bottles: these should have a cap and should be

stored in the bottle rack on the door.

MIN

MAX

COOL FLOW CONTROL

MIN

MAX

COOL FLOW CONTROL

D757/1