Clarke X-Pro CAT213 Operating & Maintenance Instructions - Page 8

Browse online or download pdf Operating & Maintenance Instructions for Power Tool Clarke X-Pro CAT213. Clarke X-Pro CAT213 17 pages. Air nibbler

Print Page

BEFORE USE

WARNING: COMPRESSED AIR CAN BE DANGEROUS. ENSURE THAT YOU

ARE FAMILIAR WITH ALL PRECAUTIONS RELATING TO THE USE OF AIR

COMPRESSORS AND A COMPRESSED AIR SUPPLY.

When opening the carton, check that all the items are present. Any damage

or deficiency should be reported to your CLARKE dealer immediately.

The carton should contain:

• Air Nibbler tool

• Male inlet adaptor

• Spare Die and blade

1. Remove the plastic blanking plug

from the air inlet connection.

2. Pour 2-3 drops of CLARKE airline oil

into the air inlet port. This should be

done regardless of whether or not

a lubricated air supply is to be

used.

3. If required, connect an in-line mini

oiler to the tool.

• A mini oiler helps to prolong the

life of any air tool.

4. Connect a suitable hose as shown or use the snap connector supplied to

connect directly to the hose.

5. Connect the other end of the hose to the compressor.

• PTFE tape may be useful for sealing threaded connections.

6. Turn on the air supply and check for air leaks. Rectify any found before

proceeding.

7. If using a mini oiler, place a sheet of paper next the exhaust port and

squeeze the trigger for approximately 30 seconds. The oil volume is

correctly set when a light stain of oil can be seen on the paper. Excessive

oil should be avoided.

Your air nibbler is now ready for use.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]