Zanussi ZOP37902 User Manual - Page 8

Browse online or download pdf User Manual for Oven Zanussi ZOP37902. Zanussi ZOP37902 24 pages. Product manaul
Also for Zanussi ZOP37902: User Manual (24 pages), User Manual (28 pages)

Print Page

When you deactivate the appliance, the display

shows the residual heat indicator

perature in the oven is more than 40 °C. Turn

Clock functions

Symbol

Function

Minute Minder

Time of day

Duration

End

Press

again and again to change the

clock function.

Press

to confirm the settings of the

clock functions, or wait 5 seconds for the

setting to be confirmed automatically.

Setting the Duration or End function

1. Press

again and again until the symbol

flashes in the display.

2. Press + or - to set the minutes.

3. Press

to confirm.

4. Press + or - to set the hour.

5. Press

to confirm.

6. When the set time ends, the symbol

and the set time flash. The acoustic

signal sounds for two minutes. The appli-

ance deactivates. Press a button or open

the appliance door to stop the signal.

If you press

Duration

, the appliance switches to

setting the End

function.

Setting the Minute Minder

Used to set a countdown time. The maximum

time you can set is 23 hours 59 minutes. This

function has no effect on the operation of the

oven. You can set the Minute Minder at any

time, also if the appliance is off.

if the tem-

To set a countdown time.

To set, change or check the time of day. Refer to "Setting the time of day".

To set how long the appliance must operate. First set an oven function be-

fore you set this function.

To set when the appliance must be deactivated. First set an oven function

before you set this function. You can use Duration and End at the same

time (Time Delay) to set the time when the appliance must be activated and

then deactivated.

while setting the time for

the temperature knob left or right to show the

oven temperature on the display.

Description

1. Press

flash in the display.

2. Press + or - to set the Minute Minder. At

first the time is calculated in minutes and

seconds. When the time you set is longer

than 60 minutes, the symbol

in the display. The appliance then calcu-

lates the time in hours and minutes.

3. The Minute Minder starts automatically af-

ter five seconds.

4. When the set time ends, the acoustic sig-

nal sounds for two minutes. 00:00 and

flash in the display. Press a button to stop

the signal.

If you set the Minute Minder when the Du-

ration

the symbol

Count Up Timer

Use the Count Up Timer to monitor how long

the oven operates. It is on immediately when

the oven starts to heat.

To reset the Count Up Timer, press and hold +

and -. The timer starts to count up again.

You cannot use the Count Up Timer when

the Duration

ates.

again and again until

or End

function operates,

comes on in the display.

or End

function oper-

www.zanussi.com

and 00

comes on