Zanussi 132973860 User Manual - Page 16

Browse online or download pdf User Manual for Washer Zanussi 132973860. Zanussi 132973860 32 pages. Zanussi washing machine user manual

Print Page

Altering an option or a running programme

It is possible to change any option before the

programme carries it out. Before you make any

change, you must pause the washing machine

by pressing the Start/Pause button.

Changing a running programme is possible

only by resetting it. Turn the programme

selector dial to Off and then to the new

programme position. The washing water in the

tub will not emptied out. Start the new

programme by depressing the Start/Pause

button again.

Interrupting a programme

Depress the Start/Pause button to interrupt a

programme which is running, the

corresponding light starts to flash. Depress the

button again to restart the programme.

Cancelling a programme

Turn the selector dial to Off to cancel a

programme which is running. Now you can

select a new programme.

Opening the door after the programme has

started

First set the machine to pause by pressing the

Start/Pause button.

If the «Door» light flashes and after 2 minutes

goes off, the door can be opened.

If the «Door» light does not flash, this means

that the machine is already heating, that the

water level is above the bottom edge of the

door or that the drum is turning.

In this case the door can not be opened.

If you cannot open the door but you need to

open it you have to switch the machine off by

turning the selector dial to «Off».

After about 2 minutes the door can be opened

(pay attention to the water level and

temperature!).

At the end of the programme

The machine stops automatically. The

Start/Pause and «wash» lights go off and the

«end» phase light illuminates. The door can be

opened (the Door light is off).

If the «Rinse Hold» or «Night Cycle» option

has been selected, the «end» and «door»

lights illuminates but the door remains locked

to indicate that the water must be emptied out

before opening the door.

To empty out the water please read the steps

on the Rinse Hold option paragraph.

Turn the programme selector dial to «Off» to

switch the machine off. Remove the laundry

from the drum and carefully check that the

drum is empty.

If you do not intend to carry out another wash,

close the water tap. Leave the door open to

prevent the formation of mildew and

unpleasant smells.