Zanussi FCS 920 C User Manual - Page 6

Browse online or download pdf User Manual for Washer Zanussi FCS 920 C. Zanussi FCS 920 C 48 pages.

Print Page

Programme selector dial and

ON/OFF switch

Table of Symbols

= Delay start

=Prewash

= Quick

= Super Rinse

= Start/Pause

= Washing

Functions

Delay Start (button 2)

By selecting this option it is possible to delay the starting

of the washing programme by 6 or 3 hours. The selected

delay is indicated by the illumination of the corresponding

light.

Prewash (button 3)

If the laundry is heavily soiled, you can choose a pro-

gramme with prewash. Before the main wash the machine

runs a prewash up to 30° C. The washing time will be

prolonged approx. 20 minutes. The prewash ends with a

short spin in the programmes for cotton and synthetic

laundry. In the programme for delicate laundry the water is

only drained.

Quick (button 4)

Short programme for lightly soiled white-/coloured and

synthetic laundry. The washing time will be reduced ap-

prox. 10 minutes. Max. recommended temperature 60°C.

These option can not be chosen together with the

economy programme 60E and 40E. The washing

time will be reduced depending on the type of material

and the selected temperature. Recommended load for cot-

ton is 2 kg.

Super Rinse (button 5)

The machine performs 2 additional rinses during the

washing cycle. This option is recommended for people

who are allergic to detergents, and in areas where the wa-

ter is very soft.

Rinse hold or No spin (8)

• The programme selector dial allows to select a programme and/or to reset,

cancel the programme, switch the machine on/off.

• Programme selector dial is divided into following sections: Cotton, Syn-

thetic, Delicate, Wool, Special programmes. It can be turned either clock-

wise or anticlockwise.

= Rinses

= Spin

= Cycle End

= Door Locked

= Rinse Hold

= No Spin

Rinse hold

By selecting this position the water of the last rinse is not

emptied out to prevent the fabrics from creasing. When

the programme has finished, the lights "End" and "Door"

are lit to indicate that the water must be emptied out (See:

" At the end of the programme").

No spin

By selecting this position all the spinning phases are ex-

cluded. To be used for extremely delicate material. The

machine will add some additional rinses to the cotton and

synthetic programmes.

Programme progress display (7)

The light A illuminates when the machine is performing

the washing phase.

The light B illuminates when the machine is rinsing.

The light C illuminates when the machine is spinning.

The light D illuminates at the end of the washing cycle.

The light E indicates if the door can be opened:

= Drain

= Cold wash

= Wool

= Handwash

= ON/OFF

(A)

(B)

(C)

(D)

(E)