Zanussi FE 1205 Instruction Booklet - Page 15

Browse online or download pdf Instruction Booklet for Washer Zanussi FE 1205. Zanussi FE 1205 23 pages. Front-loading washing machine

Print Page

132990110•gb

17-11-2003

9:42

Operating sequence

Before the first wash we recommend that you pour 2

litres of water into the main wash compartment

of the detergent drawer in order to activate the ECO

valve. Then run a cotton cycle at 60°C, with the

machine empty, in order to remove any

manufacturing residue from the drum and tub.

Pour half a measure of detergent into the main wash

compartment and start up the machine.

1. Place the laundry in the drum

Open the door.

Place the laundry in the drum, one item at a time,

shaking them out as much as possible.

Close the door.

P0004

2. Measure out the detergent

Pull out the dispenser drawer until it stops. Measure

out the amount of detergent recommended by the

manufacturer in a graduated cup and pour it into the

main wash compartment

If you wish to carry out the prewash, pour detergent

into the appropriate compartment marked

3. Measure out the additive

If required, pour fabric softener into the compartment

marked

, without exceeding the «MAX» mark.

C0064

Pagina 15

C0065

4. Switch the machine on

Press the ON/OFF button to switch the machine on.

The display will show three blinking dashes or a

blinking zero. The light above the button will light up.

5. Select the desired programme/

fabric

Press the FABRIC button repeatedly, in order to

select the desired programme/fabric. The relevant

light will light up.

The lights relevant to the phases that form the

programme will light up.

The display will show the duration of the selected

programme, calculated on the basis of the maximum

load for each type of fabric. The START/PAUSE

button light will start flashing.

If the load of laundry to be washed is small, at the

beginning of the cycle the display will still indicate the

duration relevant to the maximum load. The duration

value will be gradually adjusted during the execution

of the cycle.