Zanussi FE1200 User Manual - Page 23

Browse online or download pdf User Manual for Washer Zanussi FE1200. Zanussi FE1200 25 pages. Washing machine fe 1200

Print Page

5. Water inlet filter

If you notice that the machine is taking longer to fill,

check that the filter in the water inlet hose is not

blocked.

Turn off the water tap.

Unscrew the hose from the tap. To do this push first

the yellow button on the hose.

Clean the filter with a stiff brush.

Screw the hose back onto the tap.

If the water is not discharged (outlet pump is

blocked, filter or drain hose are clogged), proceed as

follows to empty out the machine:

• pull out the plug from the power socket;

• close the water tap;

• if necessary, wait until the water has cooled down;

• place a bowl on the floor;

• put the drain hose end into the bowl and let the

water come out.

Should it not be possible to have access to the drain

hose because, for example, the appliance is built in

the kitchen furniture, slightly loosen the drain filter

after placing a bowl on the floor, to let the water

come out slowly.

At the end screw the filter again.

If the machine is exposed to temperatures below

0°C, certain precautions should be taken.

Turn off the water tap.

Unscrew the inlet hose.

Unhook the drain hose from the rear support and

position the end of this hose and that of the inlet

hose in a bowl. Run the draining programme.

To do this:

Switch the machine on

Select a washing programme

Press the RESET

Press START/PAUSE

Disconnect the appliance.

Screw the inlet hose and reposition the drain

hose.

When you intend to start the machine up again,

make sure that the room temperature is above

0°C.

button three times

button