Zanussi FJ 1033 User Manual - Page 25

Browse online or download pdf User Manual for Washer Zanussi FJ 1033. Zanussi FJ 1033 37 pages. Electrolux washing machine instruction booklet
Also for Zanussi FJ 1033: Instruction Booklet (36 pages)

SERVICING
C
ertain problems are due to lack of simple maintenance or oversights and can be solved
easily without having to call the Servicing Department.
!■
PROBLEM
• CAUSE
► SOLUTION
|
■ THE MACHINE DOES
NOT START UP
(with pilot light off)
• The «start/stop» button is not
pressed
• The door is not closed properly.
► Press the «start/stop» button
► Close the door
# The appliance is not plugged in
► Plug the appliance in
# There is no electric supply from the
wall socket
► Check the fuse.
► Consult a qualified electrician
(with pilot light on)
# The programming dial is not
correctly positioned
► Press and turn the programme
dial to the selected programme
• No water is entering the
machine.
► See solutions to the problem: THE
MACHINE DOES NOT FILL
■ THE MACHINE DOES NOT FILL
• The water tap is not on
► Turn the tap on
• The water supply has been
cut off.
► Wait until the water supply is
restored
• The inlet hose is bent
► Straighten the bend out
# The water pressure is too low
► If this occurs often, consult a
qualified plumber
• The water inlet filter is clogged
► Clean the filter (see page 24)
■ THE MACHINE EMPTIES AS IT
FILLS
• The end of the drain hose is too low
► Position the drain hose at the
correct height (between fiO and
90 cm)
• The end of the drain hose is
submerged in water
► The end of the drain hose must NOT
be submerged
# Drain pipe without vent-hole
► Consult a qualified plumber
■ THE MACHINE DOES NOT DRAIN
OR SPIN
# You have pressed the «Rinse Hold»
button
^ Press the button again to drain the
water
# The drain filter is clogged
► Clean the filter before doing this
• The drain hose is bent
► Straighten the hose out
# The drainage system pipes are
blocked
► Consult
a qualified plumber
# The drain hose extension is
► Consult
a qualified plumber
incorrect
25