Zanussi FJS 1084 Instruction Booklet - Page 6

Browse online or download pdf Instruction Booklet for Washer Zanussi FJS 1084. Zanussi FJS 1084 21 pages. Washing machines fjs 974 n; fjs 1084

Print Page

All transit bolts and packing must be

removed before using the appliance.

You are advised to keep all transit devices so

that they can be refitted if the machine ever has

to be transported again.

1. Using a spanner, unscrew and remove the

rear right-hand bolt and lay the machine on

its back, taking care not to squash the hoses.

This can be avoided by placing one of the

corner packing pieces between the machine

and the floor.

2. Remove the polystyrene block or blocks

(dependig on the model) from the bottom of

the machine and release the two plastic bags

by removing the adhesive strip.

3. Carefully remove the right-hand bag (1) then

the left-hand bag (2) by pulling them towards

the centre of the machine.

4. Set the machine upright and remove the two

remaining bolts from the back.

5. Pull out the three plastic spacers from the

holes into which the bolts were fitted.

6. Plug the open holes with the plugs which you

will find at the back of the appliance.

Install the machine on a flat hard floor.

Make sure that air circulation around the

machine is not impeded by carpets, rugs etc.

Check that the machine does not touch the wall

or other kitchen units.

Carefully level by screwing the adjustable feet in

or out. Never place cardboard, wood or similar

materials under the machine to compensate for

any unevenness in the floor.

After having levelled the machine, tighten the

lock nuts.

INSTALLATION

P0255

P0802

P0256

P0254

P0233

P0020

P0509