Zanussi FL 1016/A Instructions For The Use And Care - Page 16

Browse online or download pdf Instructions For The Use And Care for Washer Zanussi FL 1016/A. Zanussi FL 1016/A 32 pages. Zanussi washing machine instructions for the use and care
Also for Zanussi FL 1016/A: Instructions For Use And Care Manual (32 pages)

Zanussi FL 1016/A Instructions For The Use And Care
Gentle wash cycle
For delicates, synthetics including acrylics, acetates,
triacetates, machine-washable woollens and synthetics mixed with polyester and wool.
Recommended wash load: 1.5-2kg (3-51b);
wool max: 1kg (21b)
Wash cycle
Dispenser compartments
Position of
ab
c
programme
washing
fabric
Wash cycle description
selector
powder
conditioner
and fabric guide
Lo
b
c
Cotton articles with special finishes.
White
Main wash in water at 95°C (high level).
Special cottons
3 cold water rinses (high level).
cy
M
ab
c
White nylon and some
Whites - heavy soil
polyester/cotton mixtures
Prewash in water at 40°C (normal
level).
a
Main wash in water at 60°C (high level).
E
3 cold water rinses (high level).
N
b
c
White nylon and some
Whites
polyester/cotton mixtures
a
Main wash in water at 60°C (high level).
\ 3
3 cold water rinses (high level).
P
b
c
Coloured synthetics and mixed fabrics
Minimum Iron
Main wash in water at 50°C (high level).
Wr
3 cold water rinses (high level).
Q
b
c
Acrylics, acetates, triacetates
Delicates
and wool mixtures
RE
Main wash in water at 40°C (high level).
E
3 cold water rinses (high level).
R
b
c
Silks and printed acetate fabrics.
Silks
Main wash in water at 30°C (high level).
\-;-/
3 cold water rinses (high level).
Note: There is no water draining after the last rinse of the gentle wash cycles. This prevents
the clothes from creasing if they are left in the machine at the end of the wash cycle.
The clothes are held suspended in water until you turn the selector dial to W when the
water will be drained and the clothes will be given a gentle spin. Or the selector dial
can be turned to X when the water will drain away without spinning.
Warning: Do not open the machine door until one of the draining programmes has been
completed. If you do, there will be a flood.
16