Zanussi FL1600 Instruction Booklet - Page 6

Browse online or download pdf Instruction Booklet for Washer Zanussi FL1600. Zanussi FL1600 27 pages. Front-loading washing machine

Print Page

The Control Panel

1 "Memory" buttons and

corresponding pilot lights

A previously selected wash programme can be stored or

recalled by pressing these buttons.

To store: select the required programme using the

various buttons available (see section "Operating

sequence"), then start the machine by pressing the

START/PAUSE button. Only then can the programme

be stored by pressing one of the "Memory" buttons until

the corresponding pilot light comes on.

If the "Memory" button pressed does not yet have a

programme stored, the pilot light flashes for two

seconds.

A stored programme can be modified by pressing the

required buttons before starting the machine with the

START/PAUSE button.

To recall a programme: press the required "Memory"

button; the pilot lights corresponding to the stored

programme come on. Press the START/PAUSE button

to start the machine.

Warning! Your machine may already have a

programme stored. This means that it has been carefully

tested before leaving the factory.

Note: It is advisable to make a note of the programme

stored for each "Memory" button.

ON - OFF

CANCEL

3 4

2 ON/OFF-Cancel button

This button has two functions:

- switch the machine on/off

- cancel a programme which is running

Press the button to switch the machine on, press it again

to switch the machine off or to cancel a programme

which is running.

3 "Fabrics" button

Press this button to select the type of wash required:

White cotton, Synthetic, etc. The pilot light

corresponding to the type of wash selected comes on

and the washing time flashes on the display (9); times

are calculated on the basis of a maximum load of 5 kg

for cotton, 2 kg for delicate and synthetics and 1 kg for

wool.

The machine automatically selects the maximum

temperature and spin speed based on the type of wash

selected: the corresponding pilot lights come on.

These values can be modified by pressing the

TEMPERATURE and SPIN SPEED buttons.

The "Fabrics" button cannot be used when the

FRESHEN UP programme or one of the SPECIAL

PROGRAMMES are selected.

8 9 10 11 12